Tips on Gutter Installation & Repair
There are a few basic steps you can follow to maintain your gutters. Our professional gutter installation & repair company explains:
Firstly, you need to get up a ladder and clean out all the debris out of your gutters. When doing this, pay close attention to your downspouts. When leaves and other debris are blocking them, rainwater will not be able to drain properly, which not only means that you have to contend with mildew and mud, but you could end up with gutters which are starting to sag as well.
Inspect all the spikes which to go through the gutters. There are times when these spikes miss the rafters completely. This is done to the spike that’s working its way out of the hole. We always advise our customers to invest in new gutter spikes, so their gutters are securely fastened again.
Another thing you need to check are the sources of leaks, such as holes in the gutters and cracked caulking. Use a chisel to remove the old caulking and dry the area completely. Then, use silicon to keep water from getting down at the back of your gutters and rotting the boards.
During this time, make sure you check out all the rivets found on your downspout. Often, they are loose or have dropped out completely. All you need is a rivet gun to secure them again.
Decades before, spikes and ferrules were commonly used to hang gutters. There is no argument that they do not do the job, however, these will work themselves out eventually. Pounding them back in is only a temporary gutter repair.
One way sure way to ensure your gutter doesn’t come off is by installing fascia hanger brackets. These are simple to install. Just hook the bracket under the front of the gutter and screw the other side onto the fascia. Remember to leave the old spikes in, as they will look better than a gaping hole in your gutter.
If you think you need a gutter installation & repair service, call ASG Products at (423) 212-8253 today. We are in Bristol, TN.